The URL can be used to link to this page

Browse Search

Home My WebLink About20242120.tiffRESOLUTION RE: APPROVE TOWN OF MEAD'S REQUEST OF HOMELAND SECURITY GRANT PROGRAM'S NORTHEAST ALL -HAZARDS REGION EIGHT FISCAL AGENT FOR COOPERATIVE AGREEMENT PURCHASE VIA SOURCEWELL FOR BACKUP GENERATOR WHEREAS, the Board of County Commissioners of Weld County, Colorado, pursuant to Colorado statute and the Weld County Home Rule Charter, is vested with the authority of administering the affairs of Weld County, Colorado, and WHEREAS, pursuant to Resolution #2023-1214, approved on May 1, 2023, Cheryl Pattelli, Weld County Chief Financial Officer and Director of Finance, was designated as the Fiscal Agent for the Colorado Department of Public Safety, Division of Homeland Security and Emergency Management, Homeland Security Grant Program for the Northeast All -Hazards Region Eight, and WHEREAS, the Homeland Security Grant Program for the Northeast All -Hazards Region Eight has awarded $40,000.00 to the Town of Mead from the 2022 Fiscal Year Grant, and WHEREAS, the Town of Mead submitted a request to the Fiscal Agent to utilize said funds for the purchase of a Wagner Power Systems Caterpillar D300 GC Spark -Ignited Backup Generator for their new Public Works facility through Sourcewell Cooperative Agreement #092222 -CAT, and WHEREAS, pursuant to Section 5-4-100 of the Weld County Code, the purchasing agent may participate in joint bidding with other public agencies if it is deemed in the best interest of the County, and WHEREAS, the Fiscal Agent and Weld County Purchasing Manager have reviewed the request and recommend the Board's approval of said purchase, and WHEREAS, after review, the Board deems it advisable to approve the Town of Mead's request of the Fiscal Agent for the Cooperative Agreement Purchase of a Wagner Power Systems Caterpillar D300 GC Spark -Ignited Backup Generator via Sourcewell. NOW, THEREFORE, BE IT RESOLVED by the Board of County Commissioners of Weld County, Colorado, that the Town of Mead's request of the Fiscal Agent for the Cooperative Agreement Purchase of a Wagner Power Systems Caterpillar D300 GC Spark -Ignited Backup Generator via Sourcewell, be, and hereby is, approved. cc ; Ac-r(co), FI(cP/So), oEN (RR) o Ifri9/24 2024-2120 FI0080 COOPERATIVE AGREEMENT PURCHASE VIA SOURCEWELL FOR BACKUP GENERATOR — TOWN OF MEAD PAGE 2 The above and foregoing Resolution was, on motion duly made and seconded, adopted by the following vote on the 12th day of August, A.D., 2024. BOARD OF COUNTY COMMISSIONERS WELD CS , COLORADO ATTEST: di:C.14A) 4 Ross, C Weld County Clerk to the Board BY: Deputy Clerk to the AP,,,F.CIC/ i AS T County Attorney Date of signature: og45/2.4 Perry L.u(n�ck, Pro-Tem Mike ' reeman es 257,44,,,,k. Lori Saine 2024-2120 FI0080 Conivact (Dii 85c) (o BOARD OF COUNTY COMMISSIONERS PASS -AROUND REVIEW PASS -AROUND TITLE: Mead Generator Purchase DEPARTMENT: Accounting/DSHEM Fiscal Agent PERSON REQUESTING: Chris D'Ovidio DATE: July 31, 2023 Brief description of the problem/issue: The Homeland Security Grant Program through the Northeast All -Hazards Region awarded $40,000 to the Town of Mead in the 2022 grant year (22SHS23NER-2, P3, L3) towards the cost of a new generator at their new Public Works facility. The Sourcewell Contract #092222 -CAT is a cooperative contract provided by CAT Retailers and is available from Wagner Power Systems (WAGNER POWER SYSTEMS CO 18091 E 22nd Ave AURORA Colorado 80011-3513 303- 739-3000) through the cooperative pricing agreement, at a total cost of $169,006. We are recommending the use of the Sourcewell Contract #092222 -CAT to allow the procurement of this equipment from Wagner Power Systems, as detailed in the following quote at a total cost of $169,006, with the HSGP funding $40,000 and the Town of Mead funding remaining project costs, approximately $129,006. What options exist for the Board? Approve the purchase of the generator from Wagner Power under the Sourcewell cooperative contract. Costs (Current Fiscal Year / Ongoing or Subsequent Fiscal Years): There are not cost to the county for the purchase of this equipment. Recommendation: Recommend Approval Perry L. Buck, Pro-Tem Mike Freeman Scott K. James Kevin D. Ross , Chair Lori Seine Support Recommendation Schedule Place on BOCC Agenda Work Session Other/Comments: 2024-2120 VIZ 1ODM Karla Ford From: Sent: To: Subject: Approve Sent from my iPhone Mike Freeman Monday, August 5, 2024 9:13 AM Karla Ford Re: Please Reply - Acctg DSHEM Mead Generator Purchase.pdf On Aug 5, 2024, at 1O:58 AM, Karla Ford <kford@weld.gov>wrote: Please advise if you support recommendation and to have department place on the agenda. Karla Ford 1 Office Manager, Board of Weld County Commissioners 1150 O Street, P.O. Box 758, Greeley, Colorado 80632 :: 970.336-7204 :: kford@weld.gov:: www.weldgov.com **Please note my working hours are Monday -Thursday 7:00a.m.-4:00p.m.** <imageOO1.jpg> Confidentiality Notice: This electronic transmission and any attached documents or other writings are intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. if you have received this communication in error, please immediately notify sender by return e-mail and destroy the communication. Any disclosure, copying, distribution or the taking of any action concerning the contents of this communication or any attachments by anyone other than the named recipient is strictly prohibited. From: Chris D'Ovidio <cdovidio@weld.gov> Sent: Wednesday, July 31, 2024 2:43 PM To: Karla Ford <kford@weld.gov> Cc: Esther Gesick <egesick@weld.gov>; Cheryl Pattelli <cpattelli@weld.gov>; Bruce Barker <bbarker@weld.gov>; Toby Taylor <ttaylor@weld.gov> Subject: DSHEM Mead Generator Purchase.pdf Hi Karla Please see attached a PA regarding a DSHEM purchase for the town of Mead, approved for routing to the commissioners. Thanks <DSHEM Mead Generator Purchase.pdf> 7/12/2024 To: Weld County Purchasing From: Nicole Cantrell, Homeland Security Coordinator Subject: State Pricing Agreement — Generator for Town of Mead Weld County Code Section 5-4-100 Cooperative Purchasing allows the County to participate in cooperative purchasing programs "When determined to be in the best interest of the County, the Board of County Commissioners may select vendors or screen qualifications from other government procurement processes when those processes meet or exceed those described in this Code. The Homeland Security Grant Program through the Northeast All -Hazards Region awarded $40,000 to the Town of Mead in the 2022 grant year (22SHS23NER-2, P3, L3) towards the cost of a new generator at their new Public Works facility. The Sourcewell Contract #092222 -CAT, is a cooperative contract provided by CAT Retailers and is available from Wagner Power Systems (WAGNER POWER SYSTEMS CO 18091 E 22nd Ave AURORA Colorado 80011-3513 303-739-3000) through the cooperative pricing agreement, at a total cost of $169,002.96. We are recommending the use of the Sourcewell Contract #092222 -CAT to allow the procurement of this equipment from Wagner Power Systems, as detailed in the following quote at a total cost of $169,002.96, with the HSGP funding $40,000 and the Town of Mead funding remaining project costs, approximately $129,002.96. Sincerely, Nicole Cantrell Homeland Security Grant Coordinator WAGNER 7/15/2024 CM Re: Mead public Works City Of Mead 441 Third Street Mead Colorado 80542 970 - 535 - 2644 rbrown@townofinead.org lost, MEAD LOLORADO Sourcewell Quote see Page #4 document. Model: G14.2PGAN Quantity: 1 Rating: 300KW Certification: U.S. EPA S.I. Stationary Emergency Use Only Fuel: NATURAL GAS Excitation: AU Frequency: 60 Hz Voltage: 208 V Duty: STANDBY The following features will be included: Quote: 30986753 Town of Mead Sourcewell member # 61434 Caterpillar Sourcewell Contract #092222 - CAT Quantit Characteristic Name Feature Description 1 PGS EMISSION CERTIFICATION EPA CERT FOR EMERGENCY STANDBY 1 VOLTAGE OPTION 60HZ 208 VOLT 1 APPLICATION INDICATOR STANDBY POWER 1 ENGINE RATING _ 300ekW, 60Hz, 1800rpm 1 CONFIGURATION DG300-2 GC EMISSIONS CERT. 1 GENSET CONTROLLER LANGUAGE ENGLISH PANEL LANGUAGE 1 UL LISTING ETL EVALUATED TO UL STD 1 SEISMIC CERTIFICATION SEISMIC CERTIFICATION 1 DECAL LANGUAGE ENGLISH INSTRUCTION LANGUAGE 1 GOVERNOR TYPE STANDARD ELECTRONIC GOVERNOR 1 MARKET SEGMENT CODES GENERAL EPG 1 CUSTOMER SEGMENT PUBLIC OR CIVIL SERVICES 1 MARKET WORK CODE STANDBY POWER 1 SPACE (ALT) HEATER KITS ALTERNATOR SPACE HEATER (b) 1 ALTERNATOR TEMPERATURE RISE 130C TEMP RISE OVER 40C AMB 1 ALTERNATOR STANDARD GENERATOR 1 GAS TYPE Natural Gas 1 ENCLOSURE SOUND ATTENUATED L1 W/SEISMIC 1 GENSET SCHEME ENCLOSURE COLOUR WHITE ENCLOSURE 1 CONTROL PANEL MODEL EMCP4.2B CONTROL PANEL 1 GROUND FAULT RELAY GROUND FAULT RELAY INDICATION 1 BATTERY OPTIONS STANDARD WET BATTERY 1 BATTERY CHARGERS 20A BAT. CHARGER - INSTALLED 1 EMERGENCY STOP REMOTE EMG STOP BREAK GLASS 1 VOLT FREE CONTACTS VOLT FREE CONTACT 1 LOAD CENTER 125A LOAD CENTER 1 GFCI AC RECEPTACLE & WIRING GFCI OUTLET 1 1ST CIRCUIT BREAKER 100% LS1 1200 A 1 SHUNT TRIP STD MLCB w/Trps & Aux (d) 1 CIRCUIT BREAKER TYPE REMOVE STD BREAKER 1200A 1 AIR CLEANER (ENGINE) STD AIR CLEANER - LIGHT DUTY 1 FIRST LOCAL ANNUNCIATOR LOCAL ANNUN NFPA99-110/CSA282 Wagner Power Systems WAGNER POWER SYSTEMS CO 18091 E 22nd Ave AURORA Colorado 80011-3513 303-739-3000 01 WAGNER CAT 1 ANNUNCIATOR MOUNTED - SURFACE QUANTITY 1 1 PGS TEST REPORT FACTORY TEST 0.8PF Dealer provided components and services: Quantity Category Description Number 1 INSTALLATION SERVICES Start up Start up - v2 1 INSTALLATION SERVICES Owner & Operator Manuals O&M's 1 INSTALLATION SERVICES Crane Crane 1 INSTALLATION SERVICES Estimated Freight Freight Estimate 1 INSTALLATION SERVICES Placards Hazmat Price: USD 1-300KW Natural Gas generator with enclosure, $169,006.00. Total Price: USD 169,006.00 Lead time after submittal approval 42-46 weeks. Notes Deviations and Exceptions: 1) QUOTE INCLUDES FOB TO SITE, START-UP, AND CRANE COST. 2) FREIGHT IS ESTIMATED AT $7,200.00, IF IT EXCEEDS THAT AMOUNT A SURCHARGE WILL BE ADDED. 3) CRANE IS INCLUDED FOR OFFLOADING AND SETTING THE GENERATOR ON CONCRETE PAD. QUOTE DOES NOT INCLUDE RIGGING OR MACHINERY MOVING FOR INSIDE INSTALLATIONS. THE GENERATOR WILL BE SET ON CONCRETE PAD PROVIDED THE CRANE CAN SET UP NEXT TO GENERATOR PAD IN ONE PICK. 4) No SPECS AT TIME OF QUOTE. 5) QUOTED TO DIVE -LINE AND NARRATIVE AT TIME OF QUOTE. 6) No FACTORY WITNESS TESTING INCLUDED IN QUOTE. 7) NO ENGINEERING STAMP INCLUDED IN QUOTE. Customer Value Agreement: One-year factory authorized generator routine maintenance is not included in the quoted price, if required Add - $3,220.00 Per genset. Wagner Power Systems WAGNER POWER SYSTEMS CO 18091 E 22nd Ave AURORA Colorado 80011-3513 303-739-3000 $1, .14°9W. CAT Jerry Beutel I Wagner Power Systems EPG Sales Rep 18091 E. 22nd Avenue I Aurora, CO 8001 1 1 Cell (720) 582-8902 Jbeutel a waenere u ment.com www.wa ne ower.com U 1 Cater' illa t &enerators and their A l )/ieation Solutions. One Professional Team Delivering Quality Solutions to Every Customer Our Values in Action: Teamwork • Excellence • Accountability • Safety • Integrity p a 010 WAGNER POWER SYSTEMS Terms & Conditions: CST This proposal is confidential in nature. It shall remain the property of Wagner Equipment, and is intended solely for the use of the individual or entity to whom it is addressed. Any other use, dissemination, forwarding, printing or copying of this proposal is prohibited. Please note equipment off loading, handling, fuel, storage, permits, assembly of loose supplied items, installation or anything otherwise not specifically described in this quotation and/or associated bill of materials are hereby strictly excluded. Wagner Equipment terms/conditions will apply. Other conditions shall be subject to management approval. Payment withholds are not allowed. Should this offer be accepted it shall be included by reference or as an integral part of other contractual agreement(s) and/or purchase order document(s). Pricing is subject to change based on manufacturer changes to cost and availability Wagner Power Systems WAGNER POWER SYSTEMS CO 18091 E 22nd Ave AURORA Colorado 80011-3513 303-739-3000 This quote falls in line with Sourcewell pricing. Sourcewell Quote Sourcewell Contract #092222 -CAT From focus program letter OIL2019 (See Discounts Below) Last Update 4/12/2023 Total Quote $ 169,006 Cat Generator G 14.2PGAN Generator List Price $ 208,497 SW Member Discount % 28% SW Member Discount $ $ 57,337 Sub -Total $ 151,161 Net Priced items* $ 234.00 Sub -Total 1 $ 151,395 Town of Mead Sourcewell member # 61434 Caterpillar Sourcewell Contract #092222 -CAT *CAT ATS List Price $ - SW Member Discount (20%) $ - Tota l I $ - *Net Priced Items are subject to no further discounts (see Price Lists). Services / Source Goods List Price crane $ 3,275 freight $ 8,421 placards $ 117 O&M $ 292 $ 6,433 Start-up Sub Total $ 18,538 SW Member Discount 5% $ 927 SW Member Discount Services Total I $ 17,611 Caterpillar: Confidential Green Cat D300 GC SPARK -IGNITED GENERATOR SETS CAT Image shown may not reflect actual configuration. BENEFITS & FEATURES CAT® GENERATOR SET PACKAGE Cat natural gas fuel generator sets deliver dependable, clean, economical power even in the most demanding conditions. Cat generator sets are available in a wide range of configurations with optional equipment. Cat generator sets are designed, engineered, and manufactured for optimal performance. All major components are tested individually. Once assembled, the entire unit is tested at and above 100% of rated load for safety and operation. The generator set facilitates compliance with NFPA 110 and meets ISO 8528-5 requirements for transient response. These complete, ready -to -run packages have another distinct advantage. They all come with the comprehensive service and support of Cat dealers — beginning with prompt delivery and ongoing support throughout the life of the generator set. ENGINES The spark -ignited engines features include Cat air filter (dry, disposable), radiator outlet duct adapter, oil filters, flexible exhaust connection (open generator sets), and are factory filled with Caterpillar approved oil and extended life coolant. COOLING SYSTEM The cooling system is designed to operate in 50°C/122°F ambient temperatures. It has been designed and tested to ensure proper generator set cooling, and includes the radiator, fan, belts, and all guarding installed as standard. Contact your Cat dealer for specific ambient and altitude capabilities. ALTERNATOR Full load capacity, three-phase, 12 lead, and reconnectable alternator built for extended, dependable life. Features include permanent magnet excitation, amortisseur winding, skewed stator, voltage adjustment through the EMCP controller, Class H winding insulation, and 2/3 pitch incorporated. EMCP CONTROL PANELS The Cat EMCP 4.2B control panel is fully equipped with all necessary engine gauges, AC meters, and warnings, providing expanded generator set protection and monitoring. Additional monitoring and expansion modules provide control and protection for critical installations and applications. Standby/Demand Response 300 ekW 375 kVA - 60 Hz UL2200: Evaluated by ETL to UL Standard for Safety UL2200 CSA: Designed in accordance to CSA22.2 standards NFPA: Facilitates compliance with NFPA110 Type 10: Product was tested to NFPA110 Type 10 SPECIFICATIONS ENGINE SPECIFICATIONS Engine Model 14.2 L, In -line 6, 4 -cycle Bore x Stroke 135 mm x 165 mm (5.31 in x 6.50 in) Displacement 14.17 L (864.71 in3) Compression Ratio 9.5:1 Aspiration Turbocharged-Aftercooled Fuel System Carburetor, Down Draft Governor Electronic Fuel Type Natural Gas Emission Certifications U.S. EPA Certified for Non -Emergency Rated Engine Speed 1800 rpm GENERATOR SET SPECIFICATIONS Alternator Design Sealed Bearings, Brushless, IP21 Stator 2/3 Pitch Poles 4 Available Voltages 120/208,120/240, VAC (3 -phase) 277/480, 346/600 Frequency 60 Hz Alternator Insulation Class H Voltage Regulator Type Full Digital Available Excitation Types Permanent Magnet Excitation Steady Accuracy State Regulation 0.25% Harmonic Distortion <5% LEHE1593-05 Page 1 of 4 DG300 GC SPARK -IGNITED GENERATOR SETS STANDARD EQUIPMENT Engine System General: • Oil drain extension • Air cleaner • Fan guard • Stainless steel flexible exhaust connection • Critical exhaust silencer • Factory -filled oil • Radiator duct adapter (open set only) Fuel System: • Primary and secondary fuel shutoff • Flexible fuel line — NPT connection Cooling System: • Closed coolant recovery system • UV/ozone resistant hoses • Factory -installed radiator • Radiator drain extension • 50/50 ethylene glycol antifreeze Engine Electrical System: • Battery charging alternator • Battery cables • Battery tray • Solenoid activated starter motor • Rubber -booted engine electrical connections Alternator System Class H insulation material 2/3 pitch Skewed stator Permanent magnet excitation Sealed bearings Amortisseur winding Full -load capacity alternator Generator Set Internal generator set vibration isolation Separation of circuits — high/low voltage Separation of circuits — multiple breakers Wrapped exhaust piping Standard factory testing 2 -year limited warranty (Standby/Demand Response rated units) Silencer mounted in the discharge hood (enclosed only) Enclosure (if selected) Rust -proof fasteners with nylon washers to protect finish High performance sound -absorbing material Gasketed doors Stamped air-intake louvers Air discharge hoods for radiator -upward pointing Stainless steel lift-off door hinges Stainless steel lockable handles LEHE 1593-05 CONFIGURABLE OPTIONS Engine System General: • • • • Engine Oil Air Stone heater filter guard block restriction heater (open indicator set only) Engine • • Electrical 20A Battery UL battery warmer System: charger Alternator System Alternator upsizing Anti -condensation heater Tropical coating Generator Set Extended factory testing (3 -phase only) 8 -position load center 2 -year extended limited warranty 5 -year extended limited warranty 5 -year extended limited warranty 7 -year extended limited warranty 10 -year extended limited warranty Circuit Breaker Options Main line circuit breaker 2nd main line circuit breaker Shunt trip and auxiliary contact Electronic trip breakers Enclosure Standard enclosure Level 1 sound attenuation Level 2 sound attenuation Level 3 sound attenuation Steel enclosure Aluminum enclosure 150 mph wind kit 12 VDC enclosure lighting kit 120 VAC enclosure lighting kit AC/DC enclosure lighting kit Door alarm switch Control System 16 -light remote annunciator Oil temperature sender with indication alarm Remote E -stop (break glass -type, surface mount) Remote mount) E -stop (red mushroom -type, surface Remote E -stop (red mushroom -type, flush mount) Remote communication — modem Remote communication — ethernet 10A run relay Ground fault indication and protection functions Page 2 of 4 DG300 GC SPARK -IGNITED GENERATOR SETS CM® WEIGHTS & DIMENSIONS* 1 L L Is $ I e e 0 • • w• • ` to Iil .r OPEN SET (Includes Exhaust Flex) L x W x H in (mm) 136 (3455) x 57.6 (1463) x 66.1 (1678) Weight lbs (kg) 6274 (2852) Sound Level (dBA*) 88 STANDARD ENCLOSURE L x W x H in (mm) 174.7 (4437) x 57.5 (1460) x 77.8 (1976) Weight lbs (kg) Steel: 7836 (3562) Aluminum: 7042 (3201) Sound Level (dBA*) 85 LEVEL 1 ACOUSTIC ENCLOSURE Lx WxH in (mm) 200.2 (5085) x 57.5 (1460) x 77.80 (1976) Weight lbs (kg) Steel: 8298 (3772) Aluminum: 7242 (3292) Sound Level (dBA*) 79 LEVEL 2 ACOUSTIC ENCLOSURE L x W x H in (mm) 180.6 (4588.4 x 57.5 (1460) x 107.3 (2725) Weight lbs (kg) Steel: 8870 (4032) Aluminum: 7487 (3403) Sound Level (dBA*) 75 LEVEL 3 ACOUSTIC ENCLOSURE 207.2 (5264) x 63.7 (1618) x 128.90 (3275) Steel: 11808 (5025) Aluminum: 10118 (4589) 70.4 LEHE1593-05 Page 3 of 4 DG300 GC SPARK -IGNITED GENERATOR SETS EMCP 4.2B CONTROL PANEL FEATURES: • Control -panel -provided power metering and protective relaying along with engine and generator control and monitoring. • Embedded with programmable logic controller (PLC) functionality, which enables the generator set to monitor and control other equipment within the operation. • Includes inputs to collect supplementary data for the PLC to process when operating the generator set and activating external equipment. On a remote location without the ability to supply power to the battery charger, the PLC would likewise monitor the battery voltage to start and stop the machine to preserve battery, ensuring the unit is ready to run when needed. DEFINITIONS AND CONDITIONS Applicable Codes and Standards: CSA C22.2 No 100-04, UL 489, UL 869, UL 2200, NFPA 37, NFPA 70, NFPA 99, NFPA 110, IBC, IEC60034-1, IS03046, IS08528, NEMA MG 1-22, NEMA MG 1-33. Standby/Demand Response: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby/demand response power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year. LET'S DO THE WORK. LEHE1593-05 (O8/22) CIT® FINANCING Caterpillar offers an array of financial products to help you succeed through financial service excellence. Options include loans, finance lease, operating lease, working capital, and revolving line of credit. Contact your local Cat dealer for availability in your region. WORLDWIDE PRODUCT SUPPORT Cat dealers provide extensive post -sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Cat S • 0 • S`M program effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products. Deration: For power deration rates reference, please consult Cat LEHE1699-00. Ratings are based on SAE J1349 standard conditions. These ratings also apply at IS03046 standard conditions. Fuel Rates are based on heat value for natural gas of 1015 BTU/SCF @77°F (25°C) and 328 ft (100 m) above sea level. Additional ratings may be available for specific customer requirements, contact your Cat representative for details. www.cat.com/electricrower ©2022 Caterpillar All rights reserved. Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication. CAT, CATERPILLAR. LET'S DO THE WORK, their respective logos, "Caterpillar Corporate Yellow", the "Power Edge" and Cat "Modern Hex" trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. Enclosures DG175 GC to DG450 GC CM® Post -Free Twin Doors Provide Large, Unobstructed Service Access f�f � 11111ff lii if : III�II 1 Two -Point Door Latch System Ensures Proper Seal Preventing Water Ingress and Sound Egress I Weather Protective and Sound Attenuated Enclosures Dense, Closed -Cell Foam Insulation with Reflective Silver Mylar Layer Improved Sound Attenuation Without Damaging Effects From Radiant Heat Exposure ti Steel, Partial Pin Hinges with Nylon Spacers Durable, Corrosion -Free, Removable Doors Lockable Turn and Tuck Stainless Steel Latch Handle Corrosion -Free, Non -Protruding and Secure LEHE1712-02 Page 1 of 3 Enclosures DG175 GC to DG450 GC FEATURES: BENEFITS: Standardized enclosure components Ease of inventory, retrofit costs or upgrade to acoustic system; reduced parts Enclosure mounted directly to unit baseframe Simplified single component delivery and design installation with enclosure and unit in Electrostatically painted panels Maximum protection from weather elements 12 or 14 gauge steel based on kW rating Maximum sound attenuation, protection, and product life Aluminum enclosure optional Prevents corrosion in coastal regions Stainless steel door latch and hinge hardware Provides against extended rusting component life; maximum protection Stainless steel door latch strike plate Maximum door latch protection pin against enclosure paint damage from Door hinges use slip -pin design Provides quick door removal for full -unit access Polyethylene gasketing under door hinges Additional protection for enclosure paint finish Keyed door latches Protection for equipment and personnel Large removable access doors Ease of maintenance Location of access doors Provides improved access to MLCB on all units Door gasketing Improved sealing quality from sound and weather elements Weather -resistant aluminum roof design with drip ledge Provides optimum moisture/rain runoff from unit Cabled and gasketed radiator access cover from Provides weather improved elements radiator access and additional protection Acoustic retention roof pins panels manufactured with mechanical Increased acoustic foam retention within unit Polyethylene washers under all panel fasteners Additional paint finish protection from stainless steel fastener Internally fastened enclosure panels (where possible) Provides streamlined unit appearance Additional roof panel stiffener Added panel overall retention compartment rigidity and acoustic foam Self -enclosed exhaust system Provides streamlined safe unit unit appearance operation, no enclosure hot spots, Discharge air duct has been designed with minimal fasteners Ease of removal and access to exhaust system Stainless steel exhaust band clamps Provides exhaust extended seal component life; ensures proper Drain holes within air ducts Enables maximum water run-off Rodent -proof, tamper proof enclosure design Safety and security for personnel and equipment Baseframe lifting lugs lifting Ease of straps unit relocation, prevents compartment damage from 150 mph wind kit options Meets locally enforced wind requirements LEHE1712-02 Page 2of3 Enclosures DG175 GC to DG450 GC Enclosure Dimensions 14.2 L STANDARD ENCLOSURE LEVEL 1 ACOUSTIC ENCLOSURE LEVEL 2 ACOUSTIC ENCLOSURE LEVEL 3 ACOUSTIC ENCLOSURE 21.9 L STANDARD ENCLOSURE LEVEL 1 ACOUSTIC ENCLOSURE LEVEL 2 ACOUSTIC ENCLOSURE LEVEL 3 ACOUSTIC ENCLOSURE HEIGHT (H) Model DG175 GC DG200 GC DG230 GC DG250 GC DG275 GC DG300 GC DG175 GC DG200 GC DG230 GC DG250 GC DG215 GC DG300 GC DG175 GC DG200 GC DG230 GC DG250 GC DG275 GC DG300 GC DG175 GC DG200 GC DG230 GC DG250 GC DG275 GC DG300 GC wee _ I • • • Length in (mm) LENGTH (1) Width in (mm) Image represents SA enclosures Height in (mm) 153.89 (3909) 52.73 (1339.3) 69.67 (1769.6) 153.89 (3909) 174.7 (4437.4) 174.7 (4437.4) 174.7 (4437) 174.7 (4437) 180.11 (4574.7) 180.11 (4574.7) 200.19 (5084.7) 200.19 (5084.7) 52.73 (1339.3) 52.98 (1345.7) 52.98 (1345.7) 57.5 (1460) 57.5 (1460) 52.73 (1339.3) easy (1769.6) 77.8 (1976.1) 77.8 (1976.1) n.e (1976.1) [ 77.8 (1976.1) 69.67 (1769.6) . -71 • G G • a 1-s- WIDTH (W) Weight Steel lbs (kg) Weight Aluminum lbs (kg) 6577 (2983) 6035 (2738) ft 4- 6577 (2983) 7538 (3420) 7538 (3420) 7836 (3562) 7836 (3562) 6990 (3171) 6303 (2738) 6765 (3069) 6765 (3069) 7042 (3201) 7042 (3201) 6176 (2801) Sound Level (dBA) 79.9 80.5 81.3 82.9 _ 83.2 84.6 75.7 52.73 (1339.3) 57.49 (1460.4) 57.49 (1460.4) 69.67 (1769.6) 6990 (3171) 200.19 (5084.7) 57.49 (1460.4) 200.19 (5084.7) 154.45 (3922.9) 154.45 (3922.9) 57.49 (1460.4) 53.96 (1370.6) 53.96 (1370.6) 77.80 (1976.1) 77.80 (1976.1) 8094 (3672) 8094 (3672) 6176 (2801) 6955 (3155) 6955 (3155) 75.9 76.4 77.8 77.80 (1976.1) 8298 (3772) 7242 (3292) 77.7 77.80 (1976.1) 180.65 (4588.4) 57.49 (1460.4) 180.65 (4588.4) 180.6 (4588) 180.6 (4588) 207.2 (5264) 207.2 (5264) 57.49 (1460.4) 93.40 (2372.3) 93.40 (2372.3) 107.3 (2725.4) 107.3 (2725.4) 8298 (3772) 7236 (3282) 7236 (3282) 8656 (3927) 8656 (3927) 7242 (3292) 6259 (2839) 6259 (2839) 7156 (3246) 7156 (3246) 78.6 70.8 71.2 71.6 72.3 57.5 (1460) 107.3 (2725) 8870 (4032) 7487 (3403) 74.4 207.2 (5264) 207.2 (5264) 207.2 (5264) 57.5 (1460) 63.7 (1618) 63.7 (1618) 107.3 (2725) 128.90 (3275) 128.90 (3275) 8870 (4032) 10602 (4809) 10602 (4809) 7487 (3403) 9638 (4372) 9638 (4372) 75.4 70.1 70.1 63.7 (1618) 128.90 (3275) 10990 (4984) 9976 (4525) 70.3 207.2 (5264) Model DG350 GC DG400 GC DG450 GC 06350 GC DG400 GC DG450 GC DG350 GC DG400 GC D6450 GC 06350 GC DG400 GC DG450 GC 63.7 (1.618) 63.7 (1618) 63.7 (1618) 128.90 (3275) 128.90 (3275) 128.90 (3275) 10990 (4984) 11080 (5025) 11080 (5025) 9976 (4525) 70.3 10118 (4589) ,0„8 (4589) J 70.4 70.4 Length in (mm) Width in (mm) Height in (mm) Weight Steel lbs (kg) Weight Aluminum lbs (kg) Sound Level (dBA) 207.4 (5268) 207.4 (5268) 207.4 (5268) 247.5 (6285) 247.5 (6285) 247.5 (6285) 207.4 (5268) 207.4 (5268) 70(1800) 71 (1803) 71 (1803) 70 (1800) 71(1803) 71(1803) 80 (2032) 80 (2032) 80 (2032) 80 (2032) 10463 (4746) 10428 (4730) 9376 (4253) 9298 (4717) 86.5 86.5 10463 (4746) 9376 (4253) 87 70 (1800) 71(1803) 80 (2032) 80 (2032) 114 (2899) 114 (2899) 207.4 (5268) 71 (1803) 114 (2899) 232 (5892) 232 (5892) 232 (5892) 76.9 (1954) 76.9 (1954) 76.9 (1954) 129.2 (3281) 129.2 (3281) 129.2 (3281) 11470 (5203) 11211 (5085) 11470 (5203) 11808 (5356) 11759 (5333) 11808 (5356) 9808 (4449) 82.1 9720 (4409) 82.1 i _ 16997 (7710) 16997 (7710) 16997 (7710) 9808 (4449) 9954 (4515) 9951 (4513) 9954 (4515) 14447 (6553) 14447 (6553) 14447 (6553) 82 76.2 76.2 76 71.2 71.3 71.3 'All measurements are approximate and for estimation purposes only. Sound levels measured at 23 ft (7 m) and do not account for ambient site conditions. For specific Sales Models information view the Marketing Spec Sheets (MSS) below: I DG175 GC-LEHE1588 I DG23O GC - LEHE1590 D6275 GC - LEHE1592 I DG350 GC - LEHEt594 DG450 GC - LEHE1596 DGZ00 GC - LEHE1589 DG250 GC - LEHE1591 DG300 GC - LEHE7593 DG400 GC - LEHEl595 J LET'S DO THE WORK: www.cat.com(efectricpower © 2022 Caterpillar. All Rights Reserved. Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication. CAT. CATERPILLAR. LET'S DO THE WORK. their respective logos. "Caterpillar Corporate Yellow". the "Power Edge" and Cat "Modern Hex" trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. LEHE1712-02 (11-22) CAT® Contract Form Entity Information Entity Name * MEAD, TOWN OF Entity ID* @00002444 O New Entity? Contract Name* Contract ID DSHEM FISCAL AGENT PURCHASE TOWN OF MEAD 8596 Contract Status CTB REVIEW Contract Lead CDOVIDIO Contract Lead Email cdovid io@weld.gov;cpatt elli@weld.gov Parent Contract ID Requires Board Approval YES Department Project # Contract Description * THE TOWN OF MEAD HAS APPLIED FOR A $40,000 TOWARDS THE PURCHASE OF A GENERATOR FOR THEIR NEW PW FACILITY. THE SOURCEWELL CONTRACT #092222 -CAT IS A COOPERATIVE CONTRACT PROVIDED BY CAT RETAILERS AND IS AVAILABLE FROM WAGNER POWER SYSTEMS THROUGH A Contract Description 2 COOPERATIVE AT A TOTAL OF $169006. Contract Type* Department AGREEMENT ACCOUNTING Amount* Department Email $0.00 CM- Accounting@weldgov.com Renewable* NO Department Head Email CM -Accounting - Automatic Renewal DeptHead@weldgov.com Grant County Attorney GENERAL COUNTY ATTORNEY EMAIL IGA County Attorney Email CM- COUNTYATTORNEY@WEL EY@WEL D.GOV Requested BOCC Agenda Due Date Date* 08/08/2024 08/12/2024 Will a work session with BOCC be required?* NO Does Contract require Purchasing Dept. to be included? If this is a renewal enter previous Contract ID If this is part of a MSA enter MSA Contract ID Note: the Previous Contract Number and Master Services Agreement Number should be left blank if those contracts are not in OnBase Contract Dates Effective Date Termination Notice Period Contact Information Review Date* 12/31/2024 Committed Delivery Date Renewal Date Expiration Date* 12/31/2024 Contact Info Contact Name Contact Type Contact Email Contact Phone I Contact Phone 2 Purchasing Purchasing Approver Purchasing Approved Date Approval Process Department Head Finance Approver Legal Counsel CHRIS D'OVIDIO CHRIS D'OVIDIO BYRON HOWELL DH Approved Date Finance Approved Date Legal Counsel Approved Date 08/05/2024 08/05/2024 08/06/2024 Final Approval BOCC Approved Tyler Ref # AG 081224 BOCC Signed Date Originator CDOVIDIO BOCC Agenda Date 08/12/2024 Hello