HomeMy WebLinkAbout801184.tiff OCDffDEED)
3a
Continental Pipe Line Company Conoco Inc.
PO Box 2197
Houston.TX 77001
July 30, 1980
Mr. Bob Adams
Department of Planning Services
Weld County Colorado
915 10th Street
Greeley, Colorado 80631
Re: SUP 359:78:11
Mr. Adams:
As we discussed in our meeting June 27, 1980, Continental Pipe Line is
proceeding with it's plans to expand our Ft. Lupton pump Station (NW
1/4 Section 20 TAT, R66W) Station design has changed slightly since
our initial application in April, 1978. However, since these changes
are minor, I understand we may proceed with our construction under the
existing permit.
I have enclosed a new plot plan which shows the work we plan to complete
at this time. In addition I have attached an amended "Development
Standards" to reflect the changes which have taken place. Lastly, we
intend only to do the mechanical at this time. Electrical estimates
are still being developed and will be forwarded to you just prior to
our obtaining the electrical permit. Below is the Ft. Lupton cost
estimate and anticipated fee:
Material = 120,310
Construction = 41,500
Building = Include in Electrical Permit
Electrical = Estimating
Total = 161,810
Fee = $588.00
Thank you for your help in updating this permit. Should you need to
contact me, my number in Houston is 713-965-2114
Very truly yours,
119\')
C
Ba:nlvin
Project Engineer
cc: D. Stuart, Lee Crain 8011 B ` ,
CONTINENTAL PIPE LINE COMPANY - SUP
AMENDED DEVELOPMENT STANDARDS
Permitted use shall be for the further expansion and operation of
an existing pipeline pump station, it's related facilities, and
tankage for oil storage. Major facilities shall be limited to,
and conform to the following development criteria:
Existing Development Standards(DS) dated 4-8-78 as outline in
Mr. Tam Nicewarner's letter of 4-19-78, except as noted below.
A) D.S. Item 1
One (1) 350 HP, one (1) 400 HP, and one (1) 2500 HP electric
motor necessary tp drive 3 centifugal pumping units. Auto-
mated equipment to monitor these units when installed.
B) D.S. Item 2
One (1) existing 44 ft. 6-inch by 13 ft. 6 inch office building,
one (1) 12 ft. by 24 ft. warehouse, one (1) 6 ft. by 6 ft. water
shed, one (1) 20 ft. by 28 ft. power sub-station and one (1) 13 ft.
by 24 ft. control building. A new 12 ft. by 30 ft. control building
will be installed, and the existing control building will became a
28 ft. by 24 ft. work shop area after construction.
Hello