HomeMy WebLinkAbout20072709.tiff SITE APCIFIC DEVELOPMENT PLAN AND USE•SPECIAL
REVIEW(USR)APPLICATION
FOR PLANNING DEPARTMENT USE DATE RECEIVED:
• RECEIPT#/AMOUNT# IS CASE#ASSIGNED:
APPLICATION RECEIVED BY: PLANNER ASSIGNED:
Parcel Number: 1 469- 1 5-0-00-059
(12 digit number-found on Tax I.D. information,obtainable at the Weld County Assessors Office,or www.co.weld.co.us).
Legal Description Part of the NW/4 , Section 15 , Township 1 North, Range 67 West
Flood Plain: No Zone District: Industrial , Total Acreage: 47.50, Overlay District:
Geological Hazard: No , Airport Overlay District:
FEE OWNERS OF THE PROPERTY:
Name: Kerr-McGee Gathering LLC
Work Phone# 430'3=296-3600 omie a epFon . 7D-9a9-(o Email Address:
Address: 1999 Broadway, Suite 3700 City/State/Zip: Denver, CO 80202
OIL AND GAS LEASEHOLD OWNER:
Name: Noble Energy Production, Inc.
Work Phone# (303) 228-4020 Home Telephone: Email Address:
Address: 1625 Broadway, Suite 2000 City/State/Zip: Denver, CO 80004
• APPLICANT OR AUTHORIZED AGENT(See Below:Authorization must accompany applications signed by Authorized Agent):
1t4 0o d: l bl4ne-
Name: Kerr-McGee Gathering LLC
Address: 1999 Broadway, Suite 3700 City/State/Zip: Denver, CO 80202
Business Telephone: 203-29C-3600- we-9a9-low Fax No: 303-296-3601
PROPOSED USE:
Kerr-McGee Gathering LLC ("KMG") uses this site as a compressor station.
I (We) hereby depose and state under penalties of perjury that all statements, proposals, and/or plans submitted with
or contained within the application are true and correct to the best of my (our) knowledge. Signatures of all fee owners
of property must sign this application. If an Authorized Agent signs, a letter of authorization from all fee owners must
be included with the appli tion. If a corporation is the fee owner, notarized evidence must be included indicting that
the signatory has the I al authority to sign for the corporation.
Sign re' Authorized Agent Date Signature: Owner or Authorized Agent Date
EXHIBIT
2007-2709
0 III
II
USE BY SPECIAL REVIEW
AMENDED SUP-428 APPLICATION
IMPROVEMENTS AND PROPOSED IMPROVEMENTS AT
THE FREDERICK COMPRESSOR STATION
FREDERICK COMPRESSOR STATION
Township 1 North, Range 67 West, 6th P.M.
Section 15: Part of the NW/4
Weld County, Colorado
• Applicant:
Kerr-McGee Gathering, LLC
An Anadarko Company
1999 Broadway, Suite 3700
Denver, Colorado 80202
''1
Kerr/VeGee
• June 15, 2007
TABLE OF CONTENTS
• 1. Use By Special Review Application 1-1
1.1 Application 1-1
1.2 Copy of Check 1-2
2. Executive Summary 2-1
2.1 Description of Intended Use 2-1
2.2 Site Improvements 2-1
2.3 Characteristics of Installation 2-1
2.4 Characteristics of Maintenance 2-1
2.5 Relative Plans 2-1
3. Use By Special Review Questionnaire 3-1
3.1 Explain, in detail, the proposed use of the property. 3-1
3.2 Explain how this proposal is consistent with the intent of the
Weld County Comprehensive Plan. 3-1
3.3 Explain how this proposal is consistent with the intent of the
Weld County Code, Chapter 23 (Zoning) and the zone district
in which it is located.
3.4 What types of uses surround this site? Explain how the
proposed use is consistent and compatible with surrounding
land uses. 3-1
3.5 Describe, in detail, the following: 3-1
3.5.1 How many people will use this site? 3-1
• 3.5.2 How many employees are proposed to be employed at
this site? 3-1
3.5.3 What are the hours of operation? 3-2
3.5.4 What type and how may structures will be erected
(built) on this site? 3-2
3.5.5 What type and how many animals, if any, will be on
site? 3-2
3.5.6 Who will provide fire protect to this site? 3-2
3.5.7 What is the water source on the property (both
domestic and irrigation)? 3-2
3.5.8 What is the sewage disposal system on the property
(esisting and proposed)? 3-2
3.5.9 If storage or warehousing is proposed, what type of
items will be stored? 3-2
3.6 Explain the proposed landscaping for the site. The
landscaping shall be separately submitted as a landscape plan
map as part of the application submittal. 3-3
3.7 Explain any proposed reclamation procedures when
termination of the Use by Special Review activity occurs. 3-3
3.8 Explain how the storm water drainage will be handled on the
site. 3-3
3.9 Explain how long it will take to construct this site and when
construction and landscaping is scheduled to begin. 3-3
3.10 Explain where storage and/or stockpile of wastes will occur on
• this site. 3-3
4. Weld County Road Access Information Sheet 4-1
5. Site Selection 5-1
Frederick Compressor Station
T1N-R67W-15: NW1/4
Weld County, Colorado
•
6. Property Ownership Documents 6-1
• 6.1 Title Document 6-1
6.1.1 Evidence of Leasehold Ownership 6-1
6.1.2 Oil, Gas and Mineral Lease 6-2
7. Certificate of Conveyances 7-1
7.1 Certificate 7-1
7.2 Warranty Deed 7-2
8. Soils Report 8-1
9. Affidavit and Certified List of Surface Owner Names 9-I
9.1 Copy of Affidavit of Surface Owners 9-1
9.2 Names and Addresses of Surface Owners within 500 Feet of
the Special Review Property 9-2
9.3 Local Governments and Special Districts 9-3
10. Affidavit and Certified List of Mineral Owner Names 10-1
10.1 Copy of Affidavit of Mineral Owners 10-1
11. Evidence of Adequate Water Supply 11-1
12. Evidence of Adequate Sewage Disposal 12-1
13. Emergency Response Contact List 13-1
• 14. Special Review Plat 14-1
•
Frederick Compressor Station ii
TIN-R67W-15: NW1/4
Weld County, Colorado
Cheryl L.
Landman
Hull •
Staff ldLTl
,Ell 303 F98 6299
r ullaa n],r:rn
ki KerrNtGee r
�7J KerrA t•Gee
Ken-McGee Oil&Gas Onshore LP
t2396roaleay Style 3](W
Denver,CD 80202
Tel.720-2'-0-214.1 Fax 3(13-296 9523
Kerr-McGee Gathering LLC
1999 Broadway,Suite 3700,Denver,Colorado 80202
June 15,2007 303-296-3600•Fax 303-296-3601
Patrick M. Groom
WITWER, OLDENBURG,
BARRY & JOHNSON, LLP
Attorneys at Law
(970)352-3161 822 7th Street, Suite 760
(970)352-3165(fax) Greeley, CO 80631 lining
pgroom@wobjlaw.com
Re: USR Submittals for Frederick and Platteville Compressor Stations
Weld County,Colorado
Dear Kim,
Please find attached the original and twenty copies of the above referenced USRs.
• It has been a pleasure working with you in this process. Feel free to contact me at
(720) 264-2744 if you have any further requirements regarding this matter.
Sincerely yours,
Kerr-McGee Gather�C
Cheryl L. Hull
Senior Landman
Attachments
•
• IMPARTMENT OF PLANNING SERVICES
NORTH OFFICE
918 10th Street
Greeley, CO 80631
Website: www.co.weld.co.us
Phone: (970) 353-6100 Ext. 3540
Fax: (970) 304-6498
zip SOUTHWEST OFFICE
t 4209 CR
Longmont, COC 80504
COLORADO yo Phone: (720) 652-4210, Ext 8730
VV1�J Fax: (720) 652-4211
INVOICE & RECEIPT SUMMARY
June 18, 2007
Application Number PDF07-01085
App Type: Building\Department Fees\NA\NA
Office Accepted At North
Applicant Name: CHERYL HULL
KERR MCGEE GATHERING
VOICES:
voice# 34627
Recording Fee for Each Mylar Sheet(Enter#) $11.00
USR All Other Use by Special Review Permits(Enter#) $2,500.00
Total Fee: $2,511.00
PAYMENTS:
Receipt# Payment Method Ref# Payment Date Amount Cashier
43213 Check 2651003 06/18/2007 $2,511.00 PKAMADA
Total Paid: $2,511.00
•
•
1 111111 111t1111 111111 1111 1111 11111111 111 11111 Ilia 1111
3393630 06/05/2006 04:17P Weld County, CO
630 1 of 2 R 11.00 D 0.00 Steve Moreno Clerk& Recorder
• POWER OF ATTORNEY
FOR GENERAL PURPOSES IN U.S.
KERR-MCGEE OIL & GAS ONSHORE LP,a Delaware limited partnership ("Kerr-McGee") with its principal
offices in Houston,Texas,does hereby constitute and appoint
JOSEPH H.LORENZO
as its true and lawful agent and Attorney-in-Fact to perform in the name of Kerr-McGee, in conjunction with or
relating directly or indirectly to the oil, gas and other minerals business of said partnership, any or all of the
following acts:
(1) To acquire,operate,convey, assign, exchange or otherwise deal with any and all interests in real
property or personal property in the United States of America, including but not limited to areas
owned or administered by,or subject to the jurisdiction of,any federal,state or local governmental
authority,excluding only Outer Continental Shelf Lands of the United States of America;
(2) To buy, sell, exchange, process, refine, store or transport oil, gas and other minerals or the
products derived therefrom within the United States of America;
(3) To execute and deliver contracts, deeds, leases, options, bids, applications or offers to lease,
extensions,renewals, assignments,releases, rights-of-way, easements,permits,bonds,statements
of interest and of holding,other statements and reports,and any other instruments or documents of
any nature whatsoever,relating to the property interests or activities described in(1)and(2)above;
and
(4) To perform such other acts as may, in the discretion of said Attorney-in-Fact, be necessary and
•
proper to generally carry out the powers specifically enumerated above.
Ken-McGee Oil & Gas Onshore LP, hereby ratifies and confirms all acts performed by said Attorney-in-Fact
pursuant to this Power of Attorney, and hereby waives any and all defenses which might otherwise be available to
Kea-McGee to contest,negate or disaffirm such acts. Said Attorney-in-Fact is prohibited from filing simultaneous
offers on behalf of any other participant in any federal lease sale.
This Power of Attorney shall become effective as of the Effective Date shown below,and shall continue in full force
and effect until the Expiration Date shown below unless duly revoked in writing at an earlier date by Ken-McGee:
Effective Date: May 15,2006
''ea�pp,�.,,__""..,, Expiration Date: January 16,2008
IN N* i.�S$WJIFREOF,this Power of Attorney is executed as of the Effective Date shown above.
'Aji ` i4 qG µ KERR-MCGEE OIL&GAS ONSHORE LP
•g4 yam«; 4� N Delaware limited partnership
P.
s Secretary,/1�s7Kit James J. eclmer,Vice President
•
_ i
i1
111111111111 hill /VIII/ /III 11111111 III 11111 Iii /III •
3393630 06/05/2006 04:17P Weld County, CO
2 of 2 R 11.00 0 0.00 Steve Moreno Clerk& Recorder
• ACKNOWLEDGMENT
STATE OF COLORADO )
CTTY AND )
COUNTY OF DENVER )
The foregoing instrument was acknowledged before me this /& day of May,2006,by James J.Kleckner,
as Vice President of Ken-McGee Oil & Gas Onshore LP, a Delaware limited partnership, on behalf of the limited
partnership.
VVV Notary Public
My Commi,ssion
dues:
o °IA/y' 0.4. 4
i •
e
tl'N9V:),• ,G ..
t7 OF COLD_
•
•
2
• •
• 2. Executive Summary
2.1 DESCRIPTION OF INTENDED USE
This Application for an amended Use by Special Review Permit is submitted by Kerr-McGee
Gathering LLC ("KMG") as successor in interest to KN Wattenberg Transmission LTD. KMG
currently uses this site as a compressor station to compress gas for transportation through the
pipelines together with additional equipment as identified on the attached Special Review Plat.
KMG does not intend to change the nature of the use of the site, but may modernize equipment over
a period of time. It is KMG's intent to update this site for land use permitting purposes.
2.2 SITE IMPROVEMENTS
A. KMG constructed this compressor station with improvements as identified on the attached Special
Review Plat. The proposed improvements are a radio tower station which are also detailed.
2.3 CHARACTERISTICS OF INSTALLATION
Construction is expected to begin on the radio tower station as soon as KMG receives building
permits. A photo of this type of installation is included in this application for reference (See
Graphics).
2.4 CHARACTERISTICS OF MAINTENANCE
B. The compressor station operates 365 days per year, 7 days per week, and 24 hours per day and is
designed so that it may be operated unattended. An automated emergency shut down system will
• constantly monitor conditions at the station and will shut down the entire station in an emergency. A
call out system, operated on an uninterruptible power supply, will notify KMG of station shutdowns
or any operational problems.
2.5 RELATIVE PLANS
• Noise: All requirements set forth in applicable COGCC regulations regarding Noise will be
met by KMG in its operations. Exhaust from all engines, motors and related equipment shall
be vented in a direction away from occupied buildings where practical.
• Vibration: All requirements set forth in applicable COGCC regulations regarding Vibration
will be met by KMG in its operations. No unusual vibration is anticipated from the proposed
operation.
• Air and Water Quality: All requirements set forth in applicable COGCC regulations regarding
Air and Water Quality will be met by KMG in its operations. KMG will comply with the
Colorado Department of Public Health and Environment regulations by filing an Air Pollution
Emissions Notice (A.P.E.N.) and any other additional required application data, if production
volumes exceed required thresholds, and will install emissions control devices as warranted to
obtain required reductions of ozone precursors. The COGCC sets forth specific requirements
for casing depth in order to protect ground water sources. Produced water will be hauled
away and properly disposed of in accordance with COGCC regulations.
• Odor: All requirements set forth in applicable COGCC regulations regarding Odor will be
met by KMG in its operations. No noxious, prolonged or unusually high amounts of odor are
expected from the proposed operation.
•
Frederick Compressor Station 2-1
TIN-R67W-15: NW1/4
Weld County, Colorado
• •
• Visual Impacts: All requirements set forth in applicable COGCC regulations regarding Visual
• Impacts will be met by KMG in its operations. The permanent facilities will be painted in
accordance with COGCC regulations in a manner so as to harmoniously blend with the
surrounding environment. The site will be reclaimed to as near the original grades as
practicable.
• Wildlife Impacts: All requirements set forth in applicable COGCC regulations regarding
Wildlife will be met by KMG in its operations. No significant impact of wildlife is expected.
KMG's Environmental Coordinator has performed a site inspection and has cleared this
location for any environmental issues.
• Public Safety: The completed site is surrounded with a chain-link fence and gate with
adequate lock. The station will be monitored daily by KMG personnel. A complete
Emergency Response Plan has been prepared and reviewed by the local Fire Authority.
(Protection Plan).
• Access Roads: KMG will utilize the existing access roads from WCR 19 and WCR 10. The
access road is constructed to accommodate emergency vehicles and shall be properly
engineered with a 20' width, an aggregate base course surface of 6 inches compacted to a
minimum density of 95% of the maximum density. The road shall be properly graded and
culverts shall be utilized where necessary.
•
Frederick Compressor Station
TIN-R67W-15: NW1/4
Weld County, Colorado
• •
• 3. Use By Special Review Questionnaire
3.1 EXPLAIN, IN DETAIL,THE PROPOSED USE OF THE PROPERTY.
Kerr-McGee Gathering LLC ("KMG") currently operates this site as a compressor station to
compress gas for transportation through the pipelines together with additional equipment as
identified on the attached Special Review Plat.
3.2 EXPLAIN HOW THIS PROPOSAL IS CONSISTENT WITH THE INTENT OF THE WELD COUNTY
COMPREHENSIVE PLAN.
The station and improvements comports with the intent and stated goals of the Weld County
Comprehensive Plan in that it is planned in being assembled in a consolidated and coordinated
manner. Utilities, services and roads already exist.
3.3 EXPLAIN HOW THIS PROPOSAL IS CONSISTENT WITH THE INTENT OF THE WELD COUNTY
COUNTY CODE, CHAPTER 23(ZONING)AND THE ZONE DISTRIT IN WHICH IT IS LOCATED.
In particular, this proposal avoids any interference with the operation of prime farmland within the
County or encroachment upon residential or other incompatible land uses. It will also contribute to
the expansion of the County's industrial economic base by providing an essential function in the
production of natural gas in the County. The operation of the station and improvements will not
impose any new burdens or costs upon the County and will be a self-sustaining operation. No
currently productive agricultural lands or residential areas will be impacted.
3.4 WHAT TYPES OF USES SURROUND THIS SITE? EXPLAIN HOW THE PROPOSED USE IS
• CONSISTENT AND COMPATIBLE WITH SURROUNDING LAND USES.
The current station site is located within an Agricultural Zone District and therefore, additional
consideration is taken to ensure that it is established and operated in a manner that is compatible with
exisiting and planned uses in the area. The station itself has been classified as an Industrial Zone.
The soil for the property is composed of Ulm Clay Loam and Wiley Colby complex.
The compression, treatment and processing of natural gas produced in Weld County is a necessary
component of marketing this valuable resource. Providing the required treatment will not only foster
the development of an important economic base but, in so doing, will contribute to the convenience
and general welfare of the present and future residents of the County. The station contributes to the
County's tax base with little or no adverse impact in terms of additional roads or other governmental
expenditures.
3.5 DESCRIBE, IN DETAIL, THE FOLLOWING:
3.5.1 How many people will use this site?
Employees, maintenance personnel, contractors and representatives of other companies may be
present at the site from time to time. The station is designed so that it may also be operated
unattended. A maximum of 10 people may be at the site at one time.
3.5.2 How many employees are proposed to be employed at this site?
The station will be operated by the same personnel. One operator currently maintains the Station for
4 to 8 hours per day.
• Frederick Compressor Station 3-1
TIN-R67W-15: NW1/4
Weld County, Colorado
3.5.3 What are the hours of operation?
• The station operates 24 hours per day, 7 days per week,365 days per year.
3.5.4 What type and how may structures will be erected (built) on this site?
The major structures erected at the station include:
1 - Air Compressor Buildings
2 - Meter Buildings
1 - MCC/PLC Building
1 - Dehyration Building
1 - Electric Box Building
1 - Storage Building
2 - Office Buildings
1 —Main Engine Building
1 —Lubricating Oil Tank
6— Storage Tanks
11- Separators
4 - Receivers
1 - Surge Tank
1 - Deisel Tank
3 - Drain Tanks
1 - Glycol Tank
1 —Ambitrol Storage Tank,
1 —Methanol Storage Tank
• 1 —Mineral Spirit Tank, 500 Gallon
1 - Condensenser
A Radio Tower is proposed.
3.5.5 What type and how many animals, if any,will be on site?
None.
What kind (type,size,weight)of vehicles will access this site and how often?
Operating personnel will use pickups to access this site daily.
3.5.6 Who will provide fire protect to this site?
Ft. Lupton Fire Protection District.
3.5.7 What is the water source on the property(both domestic and irrigation).
Bottled water shall be provided and will be utilized for drinking and hand washing. The water from
the well that was drilled under the Well Permit# 115364 will be used for the restroom facilities and
for the intermittent cleaning of the equipment at the station. Potable water will be supplied in bottles.
3.5.8 What is the sewage disposal system on the property (existing and proposed)?
• Bathroom facilities shall be available at the compressor site on this parcel. Portable toilets shall be
Frederick Compressor Station 3-2
TIN-R67W-15: NW1/4
Weld County, Colorado
• !
3.5.9 If storage or warehousing is proposed,what type of items will be stored? The storage
• tanks are itemized on the plot plan attached.
•
•
Frederick Compressor Station
TIN-R67W-15: NW1/4
Weld County, Colorado
•
• Use Special Review Questionnaire
• 3.6 EXPLAIN THE PROPOSED LANDSCAPING FOR THE SITE. THE LANDSCAPING SHALL BE
SEPARATELY SUBMITTED AS A LANDSCAPE PLAN MAP AS PART OF THE APPLICATION
SUBMITTAL.
There is no landscaping proposed for the site. Unused areas will remain undeveloped range land.
3.7 EXPLAIN ANY PROPOSED RECLAMATION PROCEDURES WHEN TERMINATION OF THE USE
BY SPECIAL REVIEW ACTIVITY OCCURS.
Applicant will remove all above ground equipment, buried and above ground piping and any
concrete structures within 18 inches of the land surface. This site will be graded to match the
contours of the surrounding properties.
3.8 EXPLAIN HOW THE STORM WATER DRAINAGE WILL BE HANDLED ON THE SITE.
Kerr-McGee will adhere to all Colorado Dept. of Public Health and Environment's rules and
regulations in regards to storm water discharge.
3.9 EXPLAIN HOW LONG IT WILL TAKE TO CONSTRUCT THIS SITE AND WHEN CONSTRUCTION
AND LANDSCAPING IS SCHEDULED TO BEGIN.
The station is currently in operation, and improvements to the site have been installed. Construction
on the proposed radio tower should begin within 30 days of obtaining approval.
• 3.10 EXPLAIN WHERE STORAGE AND/OR STOCKPILE OF WASTES WILL OCCUR ON THIS SITE.
Any waste products will be disposed of off-site.
• Frederick Compressor Station 3-3
TIN-R67W-15: NW1/4
Weld County, Colorado
S
Hull, Cheryl
om: Beimgraben, Craig
nt: Monday, April 16, 2007 6:50 AM
o: Dokken, Peder
Subject: Wattenberg Towers Details- needing Land Approval
Attachments: Tower Drawing.pdf; tri-antenna_array.pdf; dish_antenna.pdf; omni-whip-antenna.pdf
Peder,
As a follow-up to the proposed towers to be installed in the Wattenberg field, please verify that the following are acceptable
from the Land side (zoning, permitting, etc):
• Tower
• Actual height will likely be around 100 feet. However, the towers could be extended to 120 feet for future
expansion.
• Free standing - no guyed wires.
• Details have been noted in the attachment.
• Antennas
• 2 Dish Antennas
• Each up to 4 feet in diameter(may be smaller).
• Details have been noted in the attachment. Actual antenna could vary slightly from photo.
• 1 Panel Array Antenna
• Array consists of 3 flat panel antennas, approximate dimensions 1'wide and 4'tall.
• Details have been noted in the attachment. Actual antenna could vary slightly from photo.
• Omni-whip antenna
• Approximate dimensions 2 inches round, and 4 feet long.
• • Details have been noted in the attachment. Actual antenna could vary slightly from photo.
Please let me know if I can provide any further details.
Thanks,
Craig Beimgraben
ITS Enterprise Computing -Wireless Network Systems
Anadarko Petroleum Corporation
office: 832-636-2407
craig.beimgraben@anadarko.com
tiu
—(I�yleoldl a
Tower Drawing.pdf tri-antenna_array.p dish_antenna.pdf omni-whip-antenna.
(41 KB) df(395 KB)... (313 KB) pdf(279 KB)...
•
1
` ! | ® ° /
{ ! pil ! &
% � !
ill a%
en 0` »a ! tTi9it
� , § ( || i ! ; _ e7 ! \ |
in
F.
§ ;
(
§ 6666 .
) !
E . .,.
bt Li,
Ycr
) \\/\
) &!!.E1.-
,T, \\„
a
2
ee e ®te
to
el
ECIDI EMI
j § _ } § §
it
/ l'r. . _ .
5.110g 3DIldS
\; . ` _ `Inn VI _,w: w m w \ _: -
VNOSVIO
§; T 0.5.1(7 3dIel .�_ — . _ ® —
\) ` I � _. / —� „_
r .1.4p �5`�T
IT•HyperLi .i u .9,,E/y' Q �es „ � Ctmpyativ85olutiona ForVYireless Communications
�*"�r ^`"mac. :,,z
• 5.8 GHz 29 dBi ISM / UNII Band High Performance Parabolic Model: HG5829D
Dish Wireless LAN Antenna
Applications and Features
Applications: • 5.8GHz UNII applications
• 5.8GHz ISM applications
• 5.8GHz Wireless LAN systems
• Long-range Directional Applications
• Point to Point,Point to Multi-point Systems
Optional Radome
• Wireless Bridges t'
Cover
• Backhaul Applications -
Features: • Superior performance a
• Aluminum reflector dish `
• UV Stable light gray polymer finish
• All weather operation
• Vertical or horizontal polarized mounting
• Includes tilt and swivel mast mount kit
• Optional radome cover kits available
• RoHS Compliant
• Description
Superior Performance -
The HyperGain®5.8GHz High-Performance Parabolic Dish WiFi Antenna is ideal for directional 5.8GHz ISM/
UNII band applications.It features 29 dBi with a 6 beam-width.These antennas can be oriented for either
vertical or horizontal polarization.
Rugged and Weatherproof r`
The reflector dish of these antennas are constructed from high quality aluminum which gives them superior
strength.The dish is coated in a light gray UV-inhibited polymer for durability and aesthetics.The small
diameter of the dish helps minimize wind loading.
swivel mast mount kit.This allows installation at various degrees of '
These antennas are supplied with a tilt and .,,
incline for easy alignment.The HG5829D can be adjusted up or down from 0°to 30°.
Radome Cover Kits
HyperGain®Radome Covers are an ideal way to provide additional protection to our parabolic dish
< + !r, antennas.These light weight radome kits feature fiberglass construction and UV stable gray finish.
Drain holes are provided on the radome cover to help prevent moisture build-up inside the dish
antenna.
{ ' These radome kits bolt directly to the dish antennas with the provided stainless steel hardware.Drilling
mounting holes in the antenna is not required.The radome cover can be attached to existing antennas
• '�
already mounted in the field or pre-assemble to the antenna before mounting.
f• ( e-mail:sales@hypedinktech.com•tel:561-995-2256•fax:561-995-2432
T� web:www.hyperlinktech.com•1201 Clint Moore Road•Boca Raton FL 33487
Y ^8 r3ç!YI)e111 lam+ :i 1. itneYaUve Solutions For Wireless Communications
• Specifications
Frequency 5725-5850 MHz
Gain 29 dBi
Polarization Horizontal or Vertical
Horizontal Beam Width 6°
Vertical Beam Width 6°
Front to Back Ratio 35 Db
Impedance 50 Ohm
Max.Input Power 100 Watts
VSWR <1.5:1 avg.
Weight 13.2 lbs.(6 kg)
Diameter 23.6 in.(600 mm)
Mounting 2 in.(50.8 mm)diameter mast max.
-40°C to to 85°C
Operating Temperature (-40°F to 185°F)
Lighting Protection DC Short
Connector N-Female
RoHS Compliant Yes
Radome Cover Part Number HGR-06
Wind Loading Data
• Wind Speed Loading With Radome
(MPH)
100 113 lb. 75 lb.
125 177 lb. 116 lb.
RF Antenna Patterns
HG5829D 90' 90
120• A
' 60' 120° ;�.Y 60"
750"(,/y`. ..t. •-- 30. 75p• J`f \..� .,..
•,". :may •'f. �,.. . / •' �,t ia0 L -i Y �f ' _ o^tso ? k I �' x � e-
21-.\\-----)•;:::: : :-;-•":,----,,t.
,' 330' 21tl' 4`4...,.,. ,- 330°
1 _
l 1
240' `r 300' 240• .' , 300
270 270°
Horizontal Vertical
•
H/pefl_k* e-mail:sales@hypedinktech.com•tel:561-995-2256•fax:561-995-2432
Tethadogle4 INC. web:www.hypedinkledi.com•1201 Clint Moore Road•Boca Raton FL 33487
Technologi•es t„ Innovative Solutions For Wireless Communications
m
• 900 MHz Professional 8 dBi High Performance Omni Antenna
for ISM, GSM and Wireless LAN Systems
Model: HG908U-PRO
Applications and Features
Applications: • 900MHz ISM Band
• Wireless LAN systems
• Multipoint applications
• Non Line of Sight(NLOS)
• GSM
• SCADA
• Wireless Video Links Cellular Band '
• 900MHz Cellular Band •
Features: • Superior performance s '' ,. l,Ms T:1
• Rugged industrial grade design v -
741 1748
• Lightweight fiberglass radome -'
• All weather operation
• Integral N-Female connector
• Includes heavy-duty steel mast mounting brackets
Description
• The HyperGain® HG908U-PRO is a high performance omnidirectional antenna designed for the 900 MHz ISM band. It is ideally
suited for multipoint, Non Line of Sight(NLOS) and mobile applications where high gain and wide coverage is desired.Typical
applications include 900MHz Wireless LAN,SCADA, Wireless Video Links and 900MHz Cellular band applications.
This antenna features an integral N-Female type connector that mounts through the wall of an equipment enclosure. Included
with the HG908U-PRO is a dual u-bolt mast mounting kit. Consisting of a heavy-duty steel bracket and a pair of U-bolts,this kit
allows installation on masts up to 2.0" in diameter.
This omni antenna's construction features a rugged 1.58"diameter white fiberglass radome for durability, aesthetics and long
service life. It is designed for all weather operation.
Specifications
Electrical Specifications
Frequency 900-928 MHz
Gain 8 dBi
Vertical Beam Width 16 degrees
Impedance 50 Ohm
Max.Input Power 100 Watts
VSWR < 1.5:1 avg.
•
Hypertink al j INC. :-mall:sales@htech.ckm r•1 0m1•tel: 561-995-2256Ro • •fax:561a on 533487
web:www.hypedinktech.com•1201 Clint Moore Road•Boca Raton FL 33487
iHy3.l Li �1
T. + des innovative Solutions For Wireless communications
• Mechanical Specifications
Connector Integral N-Female
Weight 2.8 lbs. (1.3 Kg)
Length 47.5 in. (1.2 m)
Radome Diameter 1.58 in. (40.1 mm)
Base Diameter 1.71 in. (43.4 mm)
Radome Material White Fiberglass
Mounting 11/4" to 2" dia. mast max.
(31.7mm to 50.8mm dia.)
Polarization Vertical
Operating Temperature -40° C to to 85° C
(-40° F to 185° F)
RoHS Compliant Yes
RF Antenna Gain Patterns
t2o• uu �•
150° , 30' 150' ` �:.,-''.,"'�• ,;%••,.,•'-._ 30
•
180` 'I- �'� -0j�t s 0°ta0• F �(- C+u -- 0°
= :-.; r. .••. -
2�0. • ' 330' 21P L. 't.` ,`. 330•
240' ti 300' 210• r 300`
................
270' 270'
Vertical Horizontal
This product is backed by Hyperlink's Limited Warranty.
•
e-mall:sale@hyperlinktech.com•tel: 561-995-2256•fax:561-995-2432
Technologies,inc web:www.hypedinktedtcom•1201 Clint Moore Road•Boca Raton FL 33487
pC4 #
�THAy�p}�e�rLi ( yoyatrv8 Solutions For Wireless Communications
Technologies'c n ier.S #` -rte. , .
• 2.4 GHz Sectorized Omnidirectional Array
Tri-Antenna Array
tr
Applications and Features $ ,
r
Applications: • 2.4 GHz ISM Band
• IEEE 802.11b and 802.11g Wireless LAN
• Point to Multi-Point Systems r
• Wireless Broadband Systems t}.,
Features: • Tri-Antenna Array '
• High performance sectorial antennas I
.
•
• 360° coverage _ - -
• 0-20° mechanical up/down tilt J tr-I ''^ `:'--
• Available in single fed or individual fed models s Jl •�I,�"
• Single fed models feature 3-Way signal splitter and jumper cables .., '{
• DC ground lightning protection
• Can be mounted to round or square masts (17 dBi Version Shown)
• Stainless steel construction for all-weather operation
• Vertical polarization
• Available in 14 dBi*, 17 dBi* and 20 dBi* versions
Models
• Single Fed Models (1 Input into 3 Antennas)
Frequency Gain Splitter Connectors Includes Part Number
2.4 GHz 14 dBi* N-Female (3) 120° Sector Antennas HK2414-12ONF
(1) 3-Way Signal Splitter w/N-Female Connectors
(3) 2 ft. WBC400 Jumper Cables - N-Male to N-Male
(1) Array Mounting System
RP-TNC Jack (3) 120° Sector Antennas HK2414-12ORT
(1) 3-Way Signal Splitter w/RP-TNC Jack Connectors
(3) 2 ft. WBC400 Jumper Cables - N-Male to RP-TNC Plug
(1) Array Mounting System
2.4 GHz 17 dBi* N-Female (3) 120° Sector Antennas HK2417-12ONF
(1) 3-Way Signal Splitter w/N-Female Connectors
(3) 2 ft. WBC400 Jumper Cables - N-Male to N-Male
(1)Array Mounting System
RP-TNC Jack (3) 120° Sector Antennas HK2417-12ORT
(1) 3-Way Signal Splitter w/RP-TNC Jack Connectors
(3) 2 ft. WBC400 Jumper Cables- N-Male to RP-TNC Plug
(1)Array Mounting System
2.4 GHz 20 dBi* N-Female (3) 120° Sector Antennas HK2420-12ONF
--. f. (1) 3-Way Signal Splitter w/N-Female Connectors
I, (3) 2 ft. WBC400 Jumper Cables - N-Male to N-Male
(1)Array Mounting System
RP-TNC Jack (3) 120° Sector Antennas - - HK2420-12ORT
--: (1) 3-Way Signal Splitter w/RP-TNC Jack Connectors
(3) 2 ft. WBC400 Jumper Cables - N-Male to RP-TNC Plug
(1)Array Mounting System.
•
Hyperik*T�••�•�� ���dp� e-mail:sales@hypedinktech.mm•tel:561-995-2256•fax:561-995-2432
web:www.hypedinktech.com•1201 pint Moore Road•Boca Raton FL 33487
•Hypeirtr ,�N
LimeTechnologies ,,,:„...:,:2:::, a tnnavahve Solutions For Wireless Communications
P r . ,. nr.Wa,< ,,. '
• Individual Fed Models (3 Inputs into 3 Antennas)
Frequency Gain Antenna Connectors Includes Part Number
2.4 GHz 14 dBi* N-Female (3) 120° Sector Antennas HK2414-120
(1) Array Mounting System
2.4 GHz 17 dBi* N-Female (3) 120° Sector Antennas HK2417-120
(1)Array Mounting System
2.4 GHz 20 dBi* N-Female (3) 120° Sector Antennas HK2420-120
(1) Array Mounting System
Description
The HyperGain® Sectorized Omni Array features our high performance 2.4 GHz 120°sectorial antennas. Each of the three
antennas in this array can be adjusted individually (0-20° up or down tilt)to compensate for the geography of the installation
location.This helps ensure maximum coverage of the array for service providers in the 2.4GHz ISM band.
Flexibility of Single or Individual Feeds r 1
Ideal for smaller applications, the sectorized omni array is available as a single fed system (1 .1);,..;;,:'
input into 3 antennas). Since each antenna is fed from a 3-Way signal splitter, only a single 1 f
radio/amplifier is required. As the system grows additional capacity can be added by simple >j F ,'
adding more base station radios and bypassing the splatter's array, thus feeding each antenna ��t�r ::,, 6
from a separate radio. Single fed models feature a industrial grade 3-Way signal splitter(with N- gt CI
Female or RP-TNC lack connectors) and three 2 ft. (0.6m) WBC400 jumper cables.
• (Signal Splitter Detail)
For higher system capacities, the array can be purchased as a individual fed system (each antenna fed individually).The
advantages of this type of system includes higher gain than the single fed systems and better isolation of each of the three
antennas. Interference from adjoining antennas is reduced thus improving performance.
The sectorized omni arrays are designed for all-weather operation.They feature heavy-duty plastic antenna radomes and
stainless steel mounting systems.The array can be mounted directly onto masts 11/4" to 2" (31.7 to 50.8mm) in dia using the
provided U-Bolts or bolted directly to square masts/beams up to 31/4' (82.5mm) square.The mounting bracket can also accept
3" (76.2 mm) U-Bolts (not included)for larger masts.
Additional Product Photos
14 dBi* Array 17 dBi* Array 17 dBi* Array shown in 20 dBi* Array
down-tilt confi•uration
111.
�b 4i
I
�f
It
T l.f •Pte(` 4, € t 4/' •
• fit ... It,,,- :.:r�' _ . -• ,� � 1' .' ' •-,•� (Uzi � a HyperUnk e-mail:sales@hypedinktech.com•tel:561-995-2256•fax:561-995-2432
Tedriob inc web:www.hypedinktedi.com•1201 Clint Moore Road•Bow Raton FL 33487
a71- • •'P"rl—t 10nonahlvs solutions For Wireless Communications
Technologies . ..
•
Specifications
Models HK2414-120 1 HK2417-120 HK2420-120
Frequency 2400 - 2500 MHz
Antenna Gain 14 dBi* 117 dBi* 120 dBi*
Polarization < Vertical
Horizontal Beam Width 120° 120° 120°
(Individual antenna)
Vertical Beam Width 15° 6.5° 6.5°
(Individual antenna)
Lightning Protection DC Ground
Power Rating (Single Fed) 25 Watts
Antenna Radome Material UV-inhibited Plastic
Mounting System Material Stainless Steel
Mounting (Round Mast) 11/4" to 2" (31.7 to 50.8 mm) dia.
Mounting (Square Mast/Beam) 31/4" (82.5 mm) square max.
Dimensions 20" (508 mm) x 17" 39" (990 mm) x 17" 39" (990 mm) x 17"
**(0.D. Panels Fully Retracted) (432 mm) O.D.** - (432 mm) 0.D.** (432 mm) 0.D.**
Weight 14 lbs. (6.3 kg) 31 lbs. (14 kg) 44 lbs. (20 kg)
RoHS Compliant Yes
*Antenna gains specified when sectors are individually fed.
• RF Antenna Gain Patterns
90' 90°
120° 800 120° 60°
.,.-i 7SJ *
3a'150 .rr ti 0'
lag" 1 _1: C --zi—a o°laa -----I, _.,1:2i-tt : tr--? V
• �4 .r; t210". 71.1 ! -33a°
i i
240 30. ''3'00° 240 .wv
270' 270'
Single Fed Array Individual Fed Array
Guaranteed Quality
This product is backed by Hyperlink's Limited Warranty.
• Hyperl ink e-mail:sales@hypedlnktech.mm•tel:561-995-2256•fax:561-995-2432
•redynologlesf INC web:www.hypedinkted°.com•1201 Clint Moore Road•Boca Raton FL 33487
WELD COUNTY ROAD ACCESS INFORMATION SHEET
•
Weld County Department of Public Works
111 H Street, P.O. Box 758, Greeley, Colorado 80632
Phone: (970)356-4000, Ext. 3750 Fax: (970)304-6497
Road File#: Date:
RE#: Other Case#:
1.Applicant Name Kerr-McGee Gathering LLC Phone 303-296-3600
Address 1999 Broadway,Suite 3700 City Denver State CO Zip 80202
2.Address or Location of Access East side of WCR 19, 150' and 750' South of WCR 10 and
South side of WCR 10 . 1000' East of WCR 19
Section 15 Township 1 North Range 67 West Subdivision Block _Lot
Weld County Road#: 19 Side of Road East Distance from nearest intersection 150' &750'
And Weld County Road#: 10 Side of Road South Distance from nearest intersection 1000'
3. Is there an existing access(es)to the property?Yes X No #of Accesses 3
4. Proposed Use:
❑ Permanent ❑ Residential/Agricultural ❑ Industrial
❑ Temporary ❑ Subdivision ❑ Commercial X Other Oil &Gas Operations
5. Site Sketch
Legend for Access Description:
AG =Agricultural I WCR 10
• RES = Residential
O&G =Oil&Gas
D.R. = Ditch Road
O = House IL\ Existing
"4
=Shed Access Ops Area
= Existing Access WCR 19
NT
Frederick Compressor Station
3988 WCR 19
Frederick, CO80530
303 659 659 3917
Sec 15 1N 67W
Elevation: 5,058 ft.
OFFICE USE ONLY:
Road ADT Date Accidents Date
Road ADT Date Accidents Date
Drainage Requirement Culvert Size Length
Special Conditions
❑ Installation Authorized ❑ Information Insufficient
• Reviewed By: Title:
• 5. Site Selection
FOR COMMERCIAL SITES, PLEASE COMPLETE THE FOLLOWING INFORMATION
BUSINESS EMERGENCY INFORMATION:
Business Name: Kerr-McGee Gathering LLC
Address: 3988 WCR 19, Frederick, CO 80530
Business Owner: Kerr-McGee Gathering LLC
Address: 635 N. 7th Avenue, Brighton, CO 80601
List three persons in the order to be called in the event of an emergency:
Rob Smith, Sr. Plant Foreman, 635 N. 7th Ave.,, Brighton, CO 80601 303-655-4339
Dave Mildenberger, Pipeline Foreman, 635 N. 7`h Ave., Brighton, CO 80601 303-655-4306
Troy Person, Area Superintendent, 635 N. 7th Ave., Brighton, CO 80601 303-655-4308
• Business Hours: 7 AM to 5 PM Days: Monday—Friday
Security Cameras on Location
MISCELLANEOUS INFORMATION:
Office#1 Building:
Number of entry/exit doors in this building: 1 door, S
Office#2 Building:
Number of entry/exit doors in this building: 1 door, W
Main Engine Building
Number of entry/exit doors in this building: 7 doors E,W, N, S
Air Compressor Building
Number of entry/exit doors in this building: 2 doors W& S
MCC/PLC Building
• Number of entry/exit doors in this building: 2 doors E&W
Frederick Compressor Station 5-1
TIN-R67W-15: NW1/4
Weld County, Colorado
• •
MISCELLANEOUS INFORMATION(CONT'D):
• Dehydrator Building
Number of entry/exit doors in this building: 2 doors N& S
Electric Box Building
Number of entry/exit doors in this building: 1 door S
Storage Building
Number of entry/exit doors in this building: 1 door N
Is alcohol stored in building?No
Are drugs stored in building?No
Are weapons stored in building?No
UTILITY SHUT OFF LOCATIONS:
• Main Electrical: South of Main Gate
Gas Shut Off: Each building has its own gas shut off.
Exterior Water Shutoff: Outside Office Building, East side of Bldg
Interior Water Shutoff: Inside#1 Office Building, East wall of Bldg
•
Frederick Compressor Station 5-2
TIN-R67W-15: NW1/4
Weld County, Colorado
• 13. Emergency Response Contact List
Incident Contact Phone Number Comments
Fire,explosion, Fort Lupton Fire 911 or
serious injury Protection District (303) 857-4603
Weld County Sheriff's 911 or
Dept. (970) 392-4565
COGCC (303)894-2100
Fire,explosion, Fort Lupton Fire 911 or
associated with loss Protection District (303) 857-4603
of well control
Weld County Sheriff's 911 or
Dept. (970) 392-4565
COGCC (303)894-2100
Wild Well Control, Inc. (281)353-5481 Commercial well control contractor.
Reporting required for spills of crude
Spill or release COGCC 303-894-2100 oil, produced water, or E&P waste
exceeding 5 bbl or all spills that
impact surface or ground water.
Reporting required for spills
Weld County Sheriff's 911 or impacting surface water or for
Dept. (970) 392-4565 reportable quantity spills of CERCLA
hazardous substances.
Colorado Department of Reporting required for spills
Public Health and impacting surface water or for
Environment reportable quantity spills of CERCLA
hazardous substances.
Reporting required for spills
US EPA 800-227-8917 impacting surface water or for
reportable quantity spills of CERCLA
hazardous substances.
Reporting required for spills
National Response 800-424-8802 impacting surface water or for
Center reportable quantity spills of CERCLA
hazardous substances.
KMG and Contractor Troy Person (303)655-4339 Operations- Midstream
Contacts Area Supt
Rob Smith
Sr. Plant Foreman (303)655-4306 Operations- Midstream
Dave Mildenberger (303)655-4308
Pipeline Foreman (303) 559-4036 (P) Operations- Midstream
Frederick Compressor (303) 659-3917 Emergency Numbers
Station (303)890-6416(P)
Brighton (303)659-5922 24 Hour Telephone Number
•
Frederick Compressor Station 13-1
TIN-R67W-15: NW1/4
Weld County, Colorado
Hello